3. 840Dsl

• Panel Processing Unit
• Control elements on the Machine Control Panel (MCP)
• Screen layout
• Setting user interface language
• Switching ON, reference point approach
• Program structure
• Procedure for generating G code program
• Selection of the cycles via softkey
• Calling technology cycles
• Program structure
• Procedure for Creating a ShopTurn program
• Generating program blocks
• Program structure
• Procedure for Creating a ShopMill program
• Generating program blocks
• General Information
• Centering (CYCLE81)
• Drilling (CYCLE82)
• Reaming (CYCLE85)
• Boring (CYCLE86)
• Deep-hole drilling 1 (CYCLE83)
• Deep-hole drilling 2 (CYCLE830)
• Tapping (CYCLE84, 840)
• Drill and thread milling (CYCLE78)
• Position and position pattern
• Face milling (CYCLE61)
• Rectangular pocket (POCKET3)
• Circular pocket (POCKET4)
• Rectangular spigot (CYCLE76)
• Circular spigot (CYCLE77)
• Multi-edge (CYCLE79)
• Longitudinal slot (SLOT1)
• Circumferential slot (SLOT2)
• Open slot (CYCLE899)
• Long hole (LONGHOLE)
• Thread milling (CYCLE70)
• Engraving (CYCLE60)
• Stock removal (CYCLE951)
• Groove (CYCLE930)
• Undercut form E and F (CYCLE940)
• Thread undercuts (CYCLE940)
• Thread turning (CYCLE99), only for G code
• Thread chain (CYCLE98)
• Cut-off (CYCLE92)
• Contour turning
• Stock removal (CYCLE952)
• Stock removal residual (CYCLE952)
• Grooving (CYCLE952)
• Grooving residual material (CYCLE952)
• Plunge turning (CYCLE952)
• Plunge turning residual material (CYCLE952)
• Working with a B axis

• Sinumerik 840D sl controller
• Creating G code program
• Creating a ShopTurn program
• Creating a ShopMill program
• Drilling cycles
• Milling cycles
• Turning cycles

Content: Offline

Training Delivery Method: Offline

     N.A.

Consolidated Evaluation which includes Internal Assessment + Group Tasks
Badge:
Gold: m >= 85
Silver: 70 <= m < 84
Completion: Below 70